Split System 280L
Haier

- 4.5
- COP
- 276 L
- Tank
- 8.7c
- Running Cost/kWh
- 52 dB(A)
- Noise
- R32
- Refrigerant
- —
- Installed from
Who is it a good fit for?
- Large households with high hot water demand — 110 L/hr recovery rate is among the fastest in NZ.
- Very cold climate homes — Queenstown, Central Otago, inland Canterbury (−15°C rating).
- Homes with limited indoor space — split system separates outdoor unit from tank.
- Buyers wanting the fastest possible recovery — 4.58kW heating capacity outperforms all integrated units.
Review
Performance & efficiency:
One of the fastest recovery rates of any residential hot water heat pump in New Zealand — 110 L/hr competes strongly.
The split system design places a more powerful outdoor unit (4.58kW heating capacity) separately from the indoor tank, enabling that high output. It also operates down to −15°C. The lowest minimum ambient temperature of any unit in the NZ market, making it suitable for even the coldest South Island conditions.
Features:
- Solar Compatability: the SmartHQ Solar PV mode.
The trade-off is R32 refrigerant (GWP 675) (rather than the ultra-low R290 or CO2 used in the Daikin, Panasonic and Reclaim split units).
Then there is also the higher noise at 52 dB(A) measured at a distance of 1 meter - with other split units sitting at 37 dB(A).
Supply and Service Network
Haier is known for competitively priced products aimed at the middle market, and is well known in New Zealand as the owner of Fisher & Paykel (acquired in 2012). Its appliances division is based in East Tamaki, Auckland, and the Fisher & Paykel distribution and service network applies here too.
Haier is a Chinese multinational appliance and electronics manufacturer, founded in Qingdao in 1984. They entered the HWHP market in Australasia in October 2023.
Specs
Split System 280LCost & efficiency
- Typical installed price
- —
- COP (rated)
- 4.5
- Test conditions
- 20°C/15°C (DB/WB), water 15–55°C
- Test standard
- AS/NZS 5125
- Eff. cost/kWh
- 8.7c
- Input power
- 1.19 kW
- Heating capacity
- 4.58 kW
- Household size
- 3–4 people
Hot water performance
- Tank size
- 276 L
- Max temperature
- 55 °C
- Hot water output
- ~260L @ 40°C
- Recovery rate
- 110 L/hr (45°C rise at 19°C ambient)
- Max water pressure
- —
- Tank material
- Enamel (triple-layer corrosion-resistant)
- Tank insulation
- Not provided
- Backup element
- 2.6 kW
Installation & dimensions
- System type
- Split unit
- Indoor / outdoor
- Split — HP unit outdoor, cylinder indoor or outdoor
- Min clearance / space
- See installation manual
- Min space required
- See installation manual
- Dimensions (H×W×D mm)
- 545 x 780 x 286 mm (HP unit)
- Unit weight (empty)
- 30 kg
Climate & environment
- Refrigerant
- R32 (GWP 675)
- Operating range
- -15 °C to 45 °C
- Noise
- 52 dB(A)
- Heating capacity
- 4.58 kW
Controls & features
- Display type
- Digital
- Control modes
- Auto, Eco (with Solar PV), Electric, Vacation, Boost
- Smart / Wi-Fi
- Yes
- Solar PV ready
- Yes
Warranty & support
- Tank warranty
- 7 years cylinder; 5 years labour
- Parts & labour warranty
- 5 years refrigeration + other components; 5 years labour
- Installer restriction
- Any licensed plumber
- Supplier / brand
- Haier